3D Keycap Tilter Kit (for 58 keys)

This is a tilter kit for split keyboards with 58 keys or less, allowing for various angle adjustments.
It is installed between the key switch and keycap, allowing you to adjust the angle and height of the keycaps.
With this, you can keep your favorite keyboard and keycaps and bring the usability closer to your ideal.

Regarding Important Notes:
* Due to being 3D printed, there may be individual differences, and forcing them onto the switches may cause them to break. Even if they break, they can still be used without problems if reinforced with tape, etc.
* 1mm spacers may have burrs on the outer edges, but they can be easily removed by hand.
* The diagonal tilter is not perfectly symmetrical, so placing it in the four corners will result in a slightly distorted angle (I personally don't like it, so I don't use it).

Regarding Usage:
* You can also use multiple tilters and spacers by connecting them, such as stem → spacer → tilter → tilter.
* In this case, the longer the distance to the switch, the greater the axis wobble when pressing the key.
For example, the photo shows the use of tilt on picot\_O44 (some items not included in this kit are used).
The center space key of the keyboard in this usage example uses two 15° tilters connected to create height and angle.

Regarding Compatibility:
* It seems to be compatible with most choc v2 and MX switches, but I haven't tested it. Please use it at your own risk.
* My personal experience is that it works fine with general MX switches. Regarding choc v2 and BOX type MX switches, although they can be used, I felt that they were difficult to remove.
Official comments are included in the photo.

Please feel free to ask if you have any other questions about usage, etc.
Please consult if you wish to purchase multiple items.

I will not offer discounts.
I will accommodate shipping methods if you have any preferences.

※ The keyboard, keycaps, and key switches in the photo are not included with the product. This is only the tilting kit.